FAQ Category

Flux Core Welding Wire

Q How to choose a suitable gasless flux cored solder wire?or what type of filler wire is best for flux core stainless wire?

A
1. Welding workpiece should be done oil removal, rust removal treatment.

2. During welding , the gas flow is generally between 20 and 25 L / min .

3. When flux-cored wire is welded, the dry elongation should be 15 ~ 25 mm.

4. Welding wire warehouse humidity should be maintained no more than 60%.

5. Non-vacuum packaging wire storage time should not exceed half a year, vacuum packaging wire storage time should not exceed one year.

E71T-1C and E71T-1M,Shielding gas designator.2 Indicates the type of shielding gas used for classification. The letter“C” indicates that the electrode is classified using 100% CO2 shielding gas. The letter “M” indicates that the electrode is classified using 75–80% Argon/balance CO2 shielding gas. When no designator appears in this position, it indicates that the electrode being classified is self-shielded and that no external shielding gas was used.

Notes:solder wire with flux

a. Sizes and net weights other than those specified may be supplied as agreed between supplier and purchaser.

b. ID = inside diameter, OD = outside diameter

c. Tolerance on net weight shall be ±10%.

d. As agreed between supplier and purchaser.
Q gasless flux core wire supplier and factories or wholesale locates in such countries like?

A
China,America,Brazil,England,Russia,Poland,India,Pakistan,NewZealand,Korea,Australia,Dubai,Turkey,Indonesia,UAE.
Q stainless steel flux cored mig wire 10 famous brand are which factory?

A 1:sanzhong, 2:giant, 3:bohler, 4:rural king, 5:lincoln, 6:hyundai, 7:blue demon, 8:esab, 9:Oxford, 10:golden bridge